G20, Cbc10 Communication Board - Siemens SINAMICS S120 Manual

8.4

G20, CBC10 Communication Board

Availability of option
This option is available for the following S120 Cabinet Modules:
● Basic Line Modules
● Smart Line Modules
● Active Line Modules
● Booksize Cabinet Kits
● Chassis format Motor Modules
Description
Figure 8-1
The CBC10 CANopen communication board (CAN Communication Board) is used to
connect drives in the SINAMICS drive system to higher-level automation systems with a
CAN bus.
The CANopen Option Board uses two 9-pin sub D connectors for the connection to the CAN
bus system.
The connectors can be used as inputs or outputs. Unused pins are plated through.
The following baud rates are also supported:
10, 20, 50, 125, 250, 500, 800 kBaud and 1 MBaud.
CAUTION
The Option Board should only be inserted and removed when both the Control Unit and
Option Board are disconnected from the power supply.
The CBC10 must only be operated by qualified personnel. The ESD notices must be
observed.
Cabinet Modules
Manual, (GH5), 05/2010, A5E03263538A
CAN CBC10 Communication Board
8.4 G20, CBC10 Communication Board
Options
331