Options
8.37 M21, degree of protection IP21
8.37
M21, degree of protection IP21
8.37.1
General information
Availability of option
This option is available for the following S120 Cabinet Modules:
● Line Connection Modules
● Basic Line Modules
● Smart Line Modules
● Active Line Modules
● Booksize Base Cabinets
● Chassis format Motor Modules
● Central Braking Modules
● Auxiliary Power Supply Modules
Description
To increase the degree of protection of the cabinet units from IP20 (standard) to IP21,
additional canopies are supplied.
Increasing the degree of protection in this way ensures that not only is the cabinet unit
protected against the ingress of foreign bodies with a diameter of 12.5 mm and above (IP20,
protection level provided as standard), but also against the ingress of water droplets falling
vertically from above (IP21).
The canopy is mounted using spacers at a distance of 250 mm above the top cover of the
cabinet. The canopy increases the height of a cabinet unit by 250 mm, as shown in the
diagram below (number (1)).
Figure 8-45
456
Cabinet with canopy (250 mm higher)
Cabinet Modules
Manual, (GH5), 05/2010, A5E03263538A