Siemens SINAMICS S120 Manual page 107

Modular motion control drive

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Cable routing for customer terminal block –X55, frame sizes HX+HI and JX+JI

1. Feed the cable for the customer terminal block into the cabinet from the bottom left.

2. Use cable ties to secure the cable at suitable points.

3. Guide the cable further up into the cabinet and, when it reaches customer terminal block -

4. Use cable ties to secure the cable at suitable points.

5. Connect the cables to the customer terminal block -X55.

Cabinet Modules

Manual, (GH5), 05/2010, A5E03263538A

X55, guide it to the left or right to -X55. When doing so, route the cable in a similar

manner to the standard cables that have already been installed in the cabinet.

Electrical installation

4.4 Connections

Show Quick Links

Table of Contents