DRE Motherboard and Flash Drive
Prerequisites:
Removal
ESD
Possible damage from electrostatic discharge.
When installing or working with circuit boards, always use a wrist strap to prevent damage from
electrostatic discharge.
[1] Disconnect the connector and 3 network cables from the DRE motherboard.
9G9002 – 2011-08-15
• Perform
"Making a Configuration
• Close the film cartridge. (Touch the Pause button on the display screen.)
• De-energize the laser imager.
• Disconnect the power cord.
•
Remove the back
cover.
Connector
Adjustments and Replacements
Backup".
2-47