Crankshaft - Suzuki GS-1000 Service Manual

I -
Fig.
7,151.
Make sure that bolts are removed without
fail. Hammer lightly
the
lower
crankcase
side
with a
plastic hammer to separate the upper
and lower crankcase halves and
then
lift the
latter.
a
Remove the crankshaft sub-assembly.
counter
shaft gear and drive shaft gear which
are all mounted on
the upper
crankcase.
At this
time be careful
not
to drop
"C'"
ring
and the like.
Fig. 7-142.
Hold gear shifting fork by hand to
exltract
gear sh~fting
fork shaft from the lower
Remove cam stopper holder to remove cam
stopper and spring.
Deflection service limit:
3 rnm (0.1 1 in.)
crankcase.
Fig. 7-155.
Fig. 7-154.
r
Extract gear
shifting cam
to
the right side.
CRANKSHAFT
Crankpin wear and
big
end side clearance
Check the
wear
of each crankpin in terms
of
connecting rod movement using
a
dial gauge
as
shown.
Push the big end of the connecting rod
to
one
side and
measure its
side clearance with se
thickness gauge.
Big end side clearance specification
Standard
( 0 . 0 0 4 .
--
0.026
in.)
40.039 in.)
Fig. 7-153