Counter Reset - Ricoh M116 Service Manual

PM Intervals

The machine displays "Fuser life end notice", "Transfer roller life end notice" or "Life End
of Paper Feed Roller Unit" when one of these counters reaches each yield.

Counter Reset

The process below shows how to reset the yield counters.
1. Enter the "Service Mode".
2. Select "Eng Maintenance", and then press "OK" key.
3. Select "Reset FuserUnit", "Reset Trans Rol" or "Reset Feed " and then press "OK" key.
4. Select "Execute" and the press "OK" key.
5. Exit the Service Mode".
M116/M117 3-2 SM