Ricoh M116 Service Manual page 83

Engine Maintenance
Vert.BP.Thin
Horiz.: Dup. Back
Vert. Dup. Plain
Registration
Vert. Dup. Thick
Vert. Dup. Thin
00* – 7F
Machine ID Displays the current brand ID number.
Do not change this setting (Designed for Factory Use).
Fuser SC
This button is for resetting an SC related with the fusing errors.
Reset
Reset Trans
Clears the EM counter of the transfer roller.
Rol
Reset Feed Clears the EM counter of the paper feed roller.
SM
Adjusts the vertical registration of thin paper for t the
bypass tray. If the machine settings are reset to the
factory defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the horizontal registration the back side in
duplex mode. If the machine settings are reset to the
factory defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of plain paper for the
back side in duplex mode. If the machine settings are
reset to the factory defaults, this value does not
change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of thick paper for the
back side in duplex mode. If the machine settings are
reset to the factory defaults, this value does not
change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of thin paper for the
back side in duplex mode. If the machine settings are
reset to the factory defaults, this value does not
change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
5-5
Service Program Mode
M116/M117