Ricoh M116 Service Manual page 97

Messages
New Version: Update FW
Eng FW version: Update
Eng FW
Firmware is Updating...
Eng Firmware is
Updating...
FW Update Done. ***
Please reboot the
Machine.***
Message for Network update
Messages
Connecting...
Net Upload : End of data
Net Upload : FAIL
SM
Comment
AIO FW is transmitting
Engine FW is transmitting
AIO FW is updating
Engine FW is updating
F/W update is completed.
Comment
Connect to Printer.
Update F/W successfully.
(Transmission Time: <30 sec)
Can not open FTP port of
Printer before F/W file is
transmitted.
(Transmission will be canceled
if timeout.)
F/W file transmission can not
be completed.
(Transmission will be canceled
if timeout.)
5-19
Firmware Updating
Action
Not available
Not available
Not available
Not available
Please reboot the
Machine.
Action
Please wait a moment.
Please reboot Printer after
panel shows reboot
message.
(1) Check network cable
connection.
(2) Check Printer status if it
is available.
(3) Check Printer and PC
IP address setting.
(4) Check PC firewall
setting about FTP.
(1) Check network cable
connection.
(2) Check Printer status if it
is available.
M116/M117