Paper Transfer
4.6 PAPER TRANSFER
4.6.1 TRANSFER ROLLER
1.
Front cover (
p.4-2)
2.
Remove the AIO.
3.
Remove the transfer roller [A] (Bushing x 2, spring x 2, gear x 1, collar x 1) as shown above.
Do not touch the transfer roller surface, when reinstalling the new transfer roller.
After installing a new transfer roller
1.
Enter the "Service Mode".
2.
Select "Eng Maintenance", and then press "OK" key.
3.
Select "Reset Trans Rol" and then press "OK" key.
4.
Select "Execute" and the press "OK" key.
5.
Exit the Service Mode".
M116/M117
4-24
SM