Ricoh M116 Service Manual page 82

Service Program Mode
Engine Maintenance
Horiz.: Tray 2
Vert.T2.Plain
Registration
Vert.T2.Thick
Vert.T2.Thin
Horiz.: Bypass
Registration Vert.BP.Plain
Vert.BP.Thick
M116/M117
Adjusts the horizontal registration for tray 1. If the
machine settings are reset to the factory defaults, this
value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of plain paper for tray
2. If the machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of thick paper for tray
2. If the machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of thin paper for tray 2.
If the machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the horizontal registration for the bypass tray.
If the machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of plain paper for the
bypass tray. If the machine settings are reset to the
factory defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of thick paper for the
bypass tray. If the machine settings are reset to the
factory defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
5-4 SM