Siemens 7SR224 Technical Manual page 170

DNP V3.0
DEVICE PROFILE DOCUMENT
(Also see the DNP 3.0 Implementation Table Section 5.2.)
Timeouts while waiting for:
Data Link Confirm:
Complete Appl. Fragment:
Application Confirm:
Complete Appl. Response:
Others: Transmission Delay, (0 sec)
Select/Operate Arm Timeout, (5 sec)
Need Time Interval, (30 minutes)
Application File Timeout, (60 sec)
Unsolicited Notification Delay, (5 seconds)
Unsolicited Response Retry Delay, (between 3 – 9 seconds)
Unsolicited Offline Interval, (30 seconds)
Binary Change Event Scan Period, (Polled, Not Applicable)
Double Bit Change Event Scan Period, (Unsupported - Not Applicable)
Analog Change Event Scan Period, (Unsupported - Not Applicable)
Counter Change Event Scan Period, (Unsupported - Not Applicable)
Frozen Counter Change Event Scan Period, (Unsupported - Not Applicable)
String Change Event Scan Period, (Unsupported - Not Applicable)
Virtual Terminal Event Scan Period, (Unsupported - Not Applicable)
Sends/Executes Control Operations:
WRITE Binary Outputs
SELECT/OPERATE
DIRECT OPERATE
DIRECT OPERATE – NO ACK
Count > 1
Pulse On
Pulse Off
Latch On
Latch Off
Queue
Clear Queue
Attach explanation if 'Sometimes' or 'Configurable' was checked for any operation.
Reports Binary Input Change Events when no
specific variation requested:
Never
Only time-tagged
Only non-time-tagged
Configurable to send one or the
other
Sends Unsolicited Responses:
Never
Configurable
Only certain objects
Sometimes (attach explanation)
ENABLE/DISABLE UNSOLICITED
Function codes supported
Default Counter Object/Variation:
No Counters Reported
Configurable
Default Object
Default Variation:
Point-by-point list attached
©2010 Siemens Protection Devices Limited
None Fixed at 2sec
Fixed at ____
None
None Fixed at 10sec
Fixed at ____
None
Always
Never
Never
Always
Never
Always
Never
Always
Always
Never
Never Always
Never Always
Never Always
Never Always
Always
Never
Always
Never
Reports time-tagged Binary Input Change Events
when no specific variation requested:
Sends Static Data in Unsolicited Responses:
No other options are permitted.
Counters Roll Over at:
7SR224 Argus Data Comms
Variable Configurable.
Variable Configurable
Variable Configurable.
Variable Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Configurable
Sometimes
Configurable
Sometimes
Configurable
Sometimes
Configurable
Sometimes
Sometimes Configurable
Sometimes Configurable
Never
Binary Input Change With Time
Binary Input Change With Relative Time
Configurable
Never
When Device Restarts
When Status Flags Change
No Counters Reported
Configurable (attach explanation)
16 Bits
32 Bits
Other Value: _____
Point-by-point list attached
Chapter 4 Page 36 of 76