Setting Up the KONICA MINOLTA PS Driver (Windows)
6.5
Specifying the PostScript Tab Settings
Output of Job
Set whether to output the job to the printer, or as a Encapsulated PostScript
file.
1
Click the PostScript tab.
2
Select "To Printer" or "Encapsulated PostScript" from the job output.
Note
When you select "Encapsulated PostScript", you should set the File
Name. Click
will be prompted to enter a file name each time you print.
Compressing the Job
Set whether or not to compress the job as follows. Print data is compressed
so that the printing speed is a little improved.
1
Click the PostScript tab.
2
Select "LZW" or "Flate" from the "Job Compression" pull down list in
the Setting.
–
If you select "Flate", then you can select the Flate compression type
from the "Flate Compression" pull down list.
IC-204
and set a file name. If you do not a file name here, you
6
6-33