Table of Contents
Advertisement
Setting Up the PCL Driver
Stapling
Multiple-page documents can be stapled.
The staple function is available only when the optional finisher (excepting JS-
502) is installed.
1
Click the Setup tab.
2
Select the "Staple" check box.
3
From the drop-down list, specify the number of staples and the sta-
pling position.
Note
Depending on the selected Binding Position setting, different stapling po-
sitions are available.
Hole Punching
Holes can be punched into the printed document.
The hole punch function is available only when optional finisher (excepting
JS-502) is installed. In addition, the Punch Unit should have been installed.
1
Click the Setup tab.
2
Select the "Hole-Punch" check box.
3
From the drop-down list, specify the number of punched holes.
Fold & Staple
Process the printed document with the Fold & Staple function.
1
Click the Setup tab.
2
Select the "Fold & Staple" check box.
3
From the drop-down list, select "Fold" or "Fold & Staple".
Note
The Fold & Staple function is available only when the Saddle Kit is in-
stalled.
IC-204
5
5-14
Advertisement
Chapters
Table of Contents
