Table of Contents
Advertisement
Before you start recording
(continued)
After recording
, Press MD A to remove the MD or press
?/1 (power) to turn off the system.
"TOC" lights up or starts flashing. The TOC
is updated and recording is completed.
Before pulling out the mains lead
MD recording is completed when the MD Table
of Contents (TOC) is updated. The TOC is
updated when you eject the MD or press ?/1 to
turn off the system. Do not pull out the mains lead
before updating the TOC (while "TOC" is lit) or
while updating the TOC (while "TOC" is flashing)
to ensure a complete recording.
Protecting a recorded MD
• To protect a recorded MD, slide the tab on the side
of the MD to open the slot. In this position, the MD
cannot be recorded. To record on the MD, slide the
tab to close the slot.
Tab
Slide the tab
• If the MD is record protected, "C11" and
"Protected" appear alternately and the MD cannot
be recorded. Remove the MD, then slide the record
protection tab to the closed position.
26
Recording your favourite
CD tracks on an MD
— CD-MD Synchro Recording
You can select your favourite CD tracks with the
Programme Play feature, then record the
programme on an MD using the CD-MD Synchro
Recording feature.
If you use a partially recorded MD, recording
starts after the recorded tracks.
9
3
Selecting the tracks
1
Press FUNCTION repeatedly to switch
the function to CD.
2
Press PLAY MODE repeatedly until
"PROGRAM" appears in stop mode.
1
4,5
2 8
Advertisement
Table of Contents
