Table of Contents
Advertisement
4-239-338-11 (2)
Micro Hi-Fi
Component
System
Operating Instructions
Owner's Record
The model and serial numbers are located on the bottom of the unit. Record the serial
number in the space provided below. Refer to them whenever you call upon your Sony
dealer regarding this product.
Model No. _______________
Serial No. _______________
CMT-EP505
CMT-EP404
© 2002 Sony Corporation
Advertisement
Table of Contents
Related Manuals for Sony CMT-EP404
Summary of Contents for Sony CMT-EP404
-
Page 1: Operating Instructions
Owner’s Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. _______________ Serial No. -
Page 2: About This Manual
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. -
Page 3: Table Of Contents
Table of Contents List of Button Locations and Reference Pages Main unit ... 4 Remote control ... 5 Getting Started Hooking up the system ... 6 Inserting two size AA (R6) batteries into the remote ... 7 Setting the clock ... 7 Loading the CD ... -
Page 4: List Of Button Locations And Reference Pages
(play) w; (14, 15, 16) N*** (play) w; (14) z (recording) wa (15, 16) . m (rewind) qa (14) Z PUSH OPEN/CLOSE qf (14) x (stop) ql (14, 15) * CMT-EP505 only ** CMT-EP505, European model only ***CMT-EP404 only... -
Page 5: Remote Control
(stop) 6 (8, 9, 14, 15) The DIR function works for CMT-EP505 only. The RDS function works for CMT-EP505, European model only. ** The n (reverse play) function works for CMT- EP505 only. *** The ./> button does not work for CMT-EP404 tape function. -
Page 6: Getting Started
Getting Started Hooking up the system Do the following procedure 1 to 3 to hook up your system using the supplied cords and accessories. FM antenna Right speaker 1 Connect the speakers. Connect the speaker cords to the SPEAKER terminals as shown below. ( IM P E D A N Insert only the stripped portion. -
Page 7: Inserting Two Size Aa (R6) Batteries Into The Remote
Jack type B Extend the FM lead antenna horizontally. AM loop antenna A N T X I A C O A A N T 3 Connect the power cord to a wall outlet. If the supplied adaptor on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with the adaptor). -
Page 8: Loading The Cd
The tracks on the CD in the order you want them to be (Program Play) played (see “Programing the CD tracks” on page 9). Press nN (CMT-EP505) or N (nN on the remote, CMT-EP404). Other Operations Do this Stop playback Press x. Pause Press X. -
Page 9: Programing The Cd Tracks
Program Play. The program you made remains in the system’s memory even after it has been played back. Press CD, then press nN (CMT-EP505) or N (nN on the remote, CMT-EP404) to play the same program again. -
Page 10: Tuner
Tuner Presetting radio stations You can preset up to 30 stations for FM and AM. You can then tune in any of those stations simply by selecting the corresponding preset number. There are two ways to store the station presets. Automatically tune all of the stations that can be received in your area and then store them... -
Page 11: Listening To The Radio
Setting presets through manual tuning Press TUNER (TUNER/BAND on the remote) repeatedly to select “FM” or “AM”. Turn and hold TUNING +/– (or press and hold TUNING + or TUNING – on the remote) repeatedly to tune in the desired station. Press TUNER MEM (TUNER MEMORY on the remote). -
Page 12: Manual Tuning
• To improve AM broadcast reception, adjust the antenna (for CMT-EP505) or reorient the main unit itself (for CMT-EP404). • You can change the display into the clock display (for five seconds) by pressing DISPLAY. Using the Radio Data... - Page 13 Locating a station by program type (PTY) You can locate a station you want by selecting a program type. The system tunes in the type of programs currently being broadcast from the RDS stations stored in the tuner’s preset memory. The types of programs include NEWS, AFFAIRS (current news), INFO, SPORT, EDUCATE (education programs), DRAMA,...
-
Page 14: Tape
(CMT-EP505 only). * The tape automatically stops after playing back five times. Press nN (CMT-EP505) or N (nN on the remote, CMT-EP404). Press nN again to play the reverse side (CMT-EP505 only). Do this Press x. -
Page 15: Recording To A Tape
(CMT-EP505 only). • When an AM program is noisy while recording, set the ISS switch at the rear of the unit to select the position that most decreases the noise (CMT-EP404 only). Recording from the radio Press TUNER (TUNER/BAND on the remote). -
Page 16: Timer-Recording Radio Programs
Timer-recording radio programs To timer-record, you must preset the radio station (see “Presetting radio stations” on page 10) and set the clock (see “Setting the clock” on page 7) beforehand. Tune in the preset radio station (see “Listening to the radio” on page 11). Press CLOCK/TIMER SET on the remote repeatedly until “SET TMR”... -
Page 17: Sound Adjustment
Sound Adjustment Adjusting the sound Reinforcing the bass sound — MEGA BASS You can listen to music with stronger bass tones. Press MEGA BASS. “MEGA BASS” appears in the display and the bass is reinforced. Press again to cancel MEGA BASS. Selecting the preset effect from the music menu Press MUSIC MENU repeatedly to select... -
Page 18: Waking Up To Music
Waking up to music — Daily Timer You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock”on page 7). Prepare the sound source you want to play. • CD: Place a CD. •... -
Page 19: Display
First, check that the power cord is connected firmly and the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Sony dealer. General The display or button remains lighted or flashes even after the system was turned off. -
Page 20: Tape Deck
Problems and remedies (continued) The remote does not function. • There is an obstacle between the remote and the system. • The remote is not pointing in the direction of the system’s sensor. • The batteries have run down. Replace the batteries. -
Page 21: Additional Information
• When you move the system, take out any discs. If you have any questions or problems concerning your stereo system, please consult your nearest Sony dealer. Notes on CDs • Before playing, clean the CD with a cleaning cloth. -
Page 22: Specifications
14 + 14 W at 1 kHz, 10% THD) Music power output (reference) 27 + 27 W European model (CMT-EP404): DIN power output (rated) 6 + 6 W at 1 kHz, DIN) Continuous RMS power output (reference) 8 + 8 W... - Page 23 20 Hz - 20 kHz (±0.5 dB) Tape player section Recording system 4-track 2-channel stereo Frequency response 50 - 13 000 Hz (±3 dB), using Sony TYPE I cassette Wow and flutter ±0.15% W.Peak (IEC) 0.1% W.RMS (NAB) ±0.2% W.Peak (DIN)
- Page 24 Sony Corporation Printed in China...