Sony CMT-PX5 Operating Instructions Manual page 61

Connecting a portable MD,
etc.
Connect a portable MD, etc., to the ANALOG IN
jack on the front panel of the unit, using an audio
connecting cord (not supplied).
To the ANALOG
IN jack
Audio connecting
cord (not supplied)
Tip
Switch the function to "ANALOG IN" when listening
to or recording the sound of connected components.
Note
Do not use an audio connecting cord with resistance
(not supplied). Otherwise, sound may not be
produced.
Stereo mini-plug
Portable MD,
etc.
Connecting a tape deck, etc.
Connect the component to the TAPE IN and OUT
jacks on the rear panel of the unit, using audio
connecting cords (not supplied).
To the audio output of a component
TAPE IN
jacks
TAPE
OUT jacks
To the audio input of a component
Tip
Switch the function to "TAPE" when listening to or
recording the sound of connected components.
continued
61