Table of Contents
Advertisement
Erasing recordings (continued)
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO to display "Edit
Menu".
3
Press – or + repeatedly until
"Tr Erase?" appears, then press
ENTER/YES.
The MD deck starts playing the displayed
track.
4
Press . or > repeatedly until the
desired track number appears.
5
Press ENTER/YES.
"Complete!" appears for a few seconds and
the selected track and title are erased.
The MD deck starts playing the track
following the erased track.
When you erased the last track, the MD deck
starts playing the track before the erased
track.
To cancel erasing
Press MENU/NO.
To return to the condition before
ERASE
You can return to the original condition
immediately after erasing a track (see page 50).
Note
"Erase???" appears when the track was recorded or
edited on another deck and is protected. To erase the
track, press ENTER/YES while "Erase???" appears.
44
Erasing all tracks
You can erase the disc title, all recorded tracks
and their titles at once.
2
3
1
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO to display "Edit
Menu".
3
Press – or + repeatedly until "All
Erase?" appears, then press ENTER/
YES.
"All Erase??" appears.
4
Press ENTER/YES again.
"Complete!" appears for a few seconds and
the disc title, all recorded tracks and their
titles are erased.
To cancel erasing
Press MENU/NO.
To return to the condition before
ERASE
You can return to the original condition
immediately after erasing tracks (see page 50).
— All Erase Function
3,4
3
Advertisement
Table of Contents
