Table of Contents
Advertisement
2
Press CD 1 A and place a CD on the
disc tray.
With the label side
up. When you play
a CD single (8 cm
CD), place it on the
inner circle of the
tray.
Press CD 1 A again to close the tray.
3
Press FUNCTION repeatedly to switch
the function to CD.
4
Press PLAY MODE repeatedly until
"1DISC" appears.
5
Press SYNC MODE until "HIT
PARADE" disappears.
6
Press CD SYNC NORM SPEED.
To record at high speed, press CD SYNC
HIGH SPEED.
"NORMAL SPEED" ("HIGH SPEED" for
high-speed recording) appears. The MD deck
stands by for recording and the CD player
pauses for play.
7
Press MD HS.
Recording starts.
You cannot monitor the recorded signal
during high-speed recording. When the
recording is completed, the CD player and
the MD deck stop automatically.
To stop recording
Press s .
If you stop recording or the MD
runs out of recording time during
high-speed recording
The partial high-speed recorded track is not
recorded on the MD. Record the track again.
Tips
• The procedure described here explains how to
record from CD 1 on an MD. To record from any
other CD on an MD, see "Recording your favourite
CD tracks on an MD" on page 26.
• If you use a partially recorded MD, recording starts
after the recorded tracks.
• Depending on the disc, CD TEXT information may
also be recorded. If "CD TEXT" flashes during
recording, press NAME EDIT/SELECT on the
remote, and then press ENTER/YES to record the
title of the current track. (If "CD TEXT" is lit, it is
automatically recorded.)
• You can switch the recording mode before step 6
and record for long times. For details, see
"Recording for long times" on page 32.
• The CD 1 – 3 buttons may light regardless of
whether discs are placed on the trays just after
purchase or if you have unplugged the mains lead
for some time.
Before pulling out the mains lead
MD recording is completed when the MD Table
of Contents (TOC) is updated. The TOC is
updated when you eject the MD or press ?/1 to
turn off the system. Do not pull out the mains lead
before updating the TOC (while "TOC" is lit) or
while updating the TOC (while "TOC" is flashing)
to ensure a complete recording.
Notes
• If the play mode is set to Repeat Play or Shuffle
Play, it automatically switches to normal play at
step 6.
• If the MD is record protected, "C11" and
"Protected" appear alternately and the MD cannot
be recorded. Remove the MD, then slide the record
protection tab to the closed position (see page 26).
• If "Retry" flashes in the display, a reading failure
has occurred, and the system is trying to read the
data again (see page 29).
11
Advertisement
Table of Contents
