Getting Started Step 1: Hooking Up The System - Sony CMT-PX5 Operating Instructions Manual

Getting Started
Step 1: Hooking up the system
Perform the following procedure 1 to 4 to hook up your system using the supplied cords and
accessories.
Right speaker
1
Connect the speakers.
Connect the speaker cords to the SPEAKER
terminals on the system and to the terminals
on the speakers as shown below.
Grey (3)
Black (#)
4
CMT-PX5
rear panel
Insert this portion
AM loop aerial
FM aerial
Notes
• Keep the speaker cords away from the aerials to
prevent noise.
• The supplied speakers can be used as either the left
or right speakers. Place the speaker connected to the
SPEAKER R terminals on the right side, and the
speaker connected to the SPEAKER L terminals on
the left side of the system.
Left speaker