Using The Display - Sony CMT-PX5 Operating Instructions Manual

Programming MD tracks
(continued)
To
Cancel
Programme
Play
Add a track to
the programme
(in stop mode)
Erase the last
programmed
track
To select the desired track using
the number buttons
Press number buttons instead of performing steps
3 to 5.
To enter track numbers 10 or over, press >10
(press twice to enter 100 or over) and the track
number. To enter 0, use the 10/0 button.
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press MD H.
• "Step Full!" appears when you try to programme 26
or more tracks (steps).
24
Do this
Press x, then press PLAY
MODE repeatedly until
"PROGRAM" and
"SHUFFLE" disappear.
Perform steps 3 and 4.
Press CLEAR in stop mode.
Each time you press the
button, the last programmed
track is erased.

Using the display

You can check the time remaining in a single
track, or on an entire MD. You can also check the
disc title or a track title of an MD. Use the
DISPLAY button (upper level) and the TIME
button (lower level) to switch the display.
TIME
DISPLAY
Use the DISPLAY button to
switch the display
Use the TIME button to switch the display
Checking the remaining time
, Press TIME during play.
Each time you press the button, the display
changes as follows:
t Elapsed playing time on the current track
r
Remaining time on the current track
r
Remaining time on the current MD