Recording A Cd On An Md - Cd-Md Synchro Recording - Sony CMT-F3MD Operating Instructions Manual

Recording a CD on an
MD
— CD-MD Synchro Recording
You can make a digital recording of a CD on an
MD, marking track numbers in the same sequence
as the original CD.
You can also record a programme of favourite
tracks (see page 25).
To turn on the system, press ?/1 (power).
?/1
(power) MD indicator MD A
1
Insert a recordable MD.
With the arrow
pointing toward
the deck
With the label
side up, and the
shutter on the
righthand side
2
Press CD A and place a CD on the disc
tray.
With the label side up.
When you play a single CD, place it on the
inner circle of the tray.
10
5
MD s
4 2,3
3
Press CD A to close the disc tray.
4
Press CD-MD SYNC.
The MD deck stands by for recording and the
CD player pauses for play.
5
Press MD HS.
Recording starts.
When the recording is completed, the CD
player and the MD deck stop automatically.
To stop recording
Press MD s or CD s.
Before inserting an MD
When the system is on, make sure the MD
indicator is off. If the MD indicator is lit green,
another MD is already inserted. Press MD A and
remove the MD.
Tips
• If you use a partially recorded MD, recording starts
after the recorded tracks.
• The track numbers of the CD are recorded on to the
MD automatically.
• Depending on the disc, CD TEXT information may
also be recorded. If "CD-TEXT" flashes during
recording, press CHARACTER on the remote, and
then press ENTER/YES to record the title of the
current track. (If "CD-TEXT" is lit, it is
automatically recorded.)