Attach The Bag; Plug In The Cleaner; Set The Nozzle Height - Royal metal upright Owner's Manual

Attach the Bag
Place the bag coupling over the exhaust outlet of the machine. Slide it on and
twist to the right to lock. Attach the top of the bag by snapping the hook on
the bag chain into the eyelet on the upper corb hook.
Your New Upright is Ready To Go!
Plug in the Cleaner
Plug the electrical cord into your most convenient outlet, making sure the volt-
age indicated on the serial number plate of your cleaner is the same as your
electrical source.
Set the Nozzle Height
1. Infinite Height Settings: Lets you clean every type of carpet. Your new
upright will glide easily over your carpets and rugs, "air-lifting" them as it vac-
uums.
To adjust the nozzle on models with
an "Adjustor KnobW,(l)turn the "Rite-
Hite" knob (located above rear
wheels) counter-clockwise to raise
the nozzle off the carpeting. (2)Turn
on the vacuum cleaner. Use the fin-
ger switch conveniently located on the
handle. Push down to start--up to
stop. @)Now, gradually turn the "Rite-
Hite" knob clockwise to lower the noz-
' I e to the when the
I*/Ju//
knob
$
nof com-i
"Adjust-0-Rite" button pops IN.
At this setting the nozzle is at the
mercial models.
exact height to do the best cleaning
job. As you clean from carpets to rugs and across bare floors, check the
"Adjust-0-Rite" button and adjust the cleaner accordingly. For high shag car-
peting: adjust for a gentle sweeping action and disregard "Adjust-0-Rite" but-
ton.