Maintenance; Changing The Dust Filter Bag - Royal m7020 Operating Manual

Cylinder vacuum cleaner
Table of Contents

Advertisement

Available languages

Available languages

4 Maintenance

4.1 Changing the dust
4
Maintenance
filter bag
2
2
30
Change the dust filter bag at the latest when the dust
bag change indicator (Fig. 1/9) lights up "red" or when the
suction power drops.
ATTENTION:
Before you change the dust filter bag, switch off the
appliance and observe the instructions under ZChapter
3.2, "Switching off and retracting the power cable". This
is how you will prevent dust from destroying the
appliance.
1. Open the dust chamber cover by unlocking it and then
flipping it up (Fig. 16).
2. Open the dust chamber cover until it noticeably clicks
into place and remains open without having to be held.
NOTE:
Proceed carefully when removing the dust filter bag so
that no dust gets out of the dust filter bag.
Fig. 16
3. Pull the dust bag holder up and out together with the
dust filter bag (Fig. 17/1), as shown.
1
4. Remove any dust residues found in the dust chamber.
Fig. 17
1
5. Pull the dust filter bag (Fig. 18/1) up and out of the dust
bag holder (Fig. 18/2).
NOTE:
You can dispose of the dust filter bag with the normal
domestic waste as long as it does not contain any dirt not
permitted for domestic waste.
Fig. 18
6. Push the new dust filter bag (Fig. 19/1) into the dust bag
1
holder (Fig. 19/2) as shown, so that it rests against the
bottom mounting angles (Fig. 19/3) of the dust bag
holder.
3
Fig. 19

Advertisement

Table of Contents
loading

Table of Contents