Paper Bag Removal And Installation - Royal Power Pak Owner's Manual

PAPER BAG REMOVAL AND
INSTALLATION
NOTE:
UNPLUG CLEANER BEFORE
CHANGING PAPER BAG.
CLEANER MUST HAVE
PAPER BAG IN PLACE AT
ALL TIMES.
Check to be sure your POWER
PAK has one paper bag in place
before you begin vacuuming.
1. Remove hose if it is in place
from the face of the cleaner.
2. Depress door release button to
open door and expose paper
bag (A).
If your POWER PAK has no paper
insert in place, follow these easy
bag installation steps.
3. Place a fresh paper bag into
the bag chamber with the
cardboard collar facing you (B).
4. Be sure the paper bag is
placed back into the chamber
so the cardboard collar is flush
with the front edge of the
POWER PAK.
5. Snap the bottom two corners of
the cardboard collar behind the
two clips along the bottom edge
of the chamber. The new bag
is now secure.
6. Close the door and be sure it
snaps shut tightly.