Bag Removal And Replacement - Royal LEXON S17 Owner's Manual

BAG REMOVAL AND REPLACEMENT

BAG REMOVAL:
1.
CAUTION: TO REDUCE THE
RISK OF INJURY FROM
MOVING PARTS UNPLUG
BEFORE SERVICING.
1. When the full bag indicator
turns red, you must replace
your bag.
2. Remove the hose by pressing
the 2 buttons at the end of the
Diagram 1
hose and pull upward.
Lift front cover.
3. Pull up on the front cover
(Diagram 1).
4. Lift out bag chamber with bag
attached, by pulling on the bag
chamber handle (Diagram 2).
5. Remove full bag from chamber
by pressing the release latch
(hinge) of the bag chamber
(Diagram 3).
BAG REPLACEMENT:
1.
R
BAG TYPE:
1. Insert a new bag into bag
chamber by inserting the
"THIS SIDE DOWN" portion
of the bag collar into the bag
guides (Diagram 1). Secure in
place by locking the bag collar
under the release latch (hinge).
2. Return bag and bag chamber
Diagram 1
to the cleaner by sliding the
Replace bag to chamber.
large tab of the bag cham-
ber into the chamber guides
(Diagram 2).
3.
3. Close front cover. NOTE: If bag
is not installed correctly - cover
will not close.
4. Before re-connecting hose, be
sure the inlet opening of the
dustbag is properly aligned with
the opening of hose connection
(Diagram 3).
5. Reconnect hose.
Diagram 3
Be sure inlet opening of the dusting bag is properly aligned with
opening of hose connection.
2.
Diagram 2
Remove bag chamber.
3.
RELEASE LATCH (HINGE)
Diagram 3
Remove bag by pressing the
release latch.
2.
CHAMBER
GUIDES
BAG GUIDES
Diagram 2
Return bag & bag chamber into
chamber guides.
INCORRECT
CORRECT
8