Paper Bag Removal And Installation; Type A Paper Bags; Type B Paper Bags - Royal metal upright Owner's Manual

PAPER BAG REMOVAL AND INSTALLATION
(disconnect machine from electrical outlet prior to performing any maintenance function).
"TYPE A" PAPER BAGS
Your top-filling paper bag allows dirt and dust
to fall into the storage area, keeping the
intake channel cleaner at all times. When
the paper bag fills to the level indicated,
unplug the cleaner and replace the bag.
Check your toss out bag occassionally by
feeling for the dirt level. A clean bag assures
maximum cleaning efficiency and prolongs
the life of the machine.
"TYPE B" PAPER BAGS
1. Pull cardboard connector of paper bag
away from top-fill tube and dispose of
used paper bag.
2. Place new paper bag into cloth bag.
Keep cardboard connector facing top-fill
tube.
3. Tuck paper bag down into cloth bag as far
as possible.
4. Push cardboard connector over top-fill
tube opening as far as possible.
5. Close outer bag.
If your cleaner has the wide-opening cloth "shake-out" bag, follow these
directions when dirt reaches the half-full point:
1. Unhook bag at the top and remove from cleaner by turning inlet coupling
counter-clockwise.
2. Turn bag upside down and shake vigorously until dirt settles at bag clamp
end.
3.
Slide off bag clamp and empty dirt on papers spread on floor or in suitable
waste container.
Note: Regardless of type of bag, empty frequently for maximum cleaning effi-
ciency and machine life.