Ps3 - Ricoh B003 Service Manual

Firmware History for B003/B004/B006/B007

PS3:

Part Number
G5775906G
G5775906F
G5775906E
G5775906D
G5775906C
G5775906B
1. When a PS file contains Simplex, Duplex (short) and Duplex (long) within the same file,
only the first duplex command is recognized. This does not happen when printing via a
PS driver from Windows.
2. A configuration error occurs due to a Media Type mismatch when the Media Type is set
as an undefined value in the PS file.
3. PS file cannot be printed out correctly from the DOS prompt ().
Specification change:
Software modified so that a Paper Mismatch Error occurs if the paper size sent from Unix
Script in Controller does not match the size loaded in the machine when the job is sent with
"POSTSCRIPT" set as the filetype (previously, the job was cancelled).
The following items have been corrected:
1. Slow Printing from AutoCAD
The following items have been corrected:
4. Euro currency symbol is not printed
5. The printer controller freezes when printing from Unix Acrobat.
6. The printing speed of a PS job slows down after a PS3 job is reset.
7. When data is sent selected for 3-hole punching to the EU model, which only supports 2
& 4-hole punching, two holes are punched in the paper. Software modified so that no
holes are punched when this data is sent.
8. Many "Punch Cancelled" messages may be displayed in the Summary Error Log after
sending data to which punching could not be applied.
9. Lines sometimes appear in (what should be) blank areas.
10. PS print file is printed as text
CÓPIA NÃO CONTROLADA
Version Check Sum
1.08 F4B4
1.07 2363
1.06 C5F3
1.05 3C28
1.03 472E
1.00 5E70
Symptom Corrected
CÓPIA NÃO CONTROLADA
Production
Mar. 2003 production
Nov. 2002 production
Oct. 2002 production
Jan. 2002 production
May 2001 production
1st mass production
Version
1.08
1.07
1.06
Page 14 of 15