Completing the replacement process
Return the failed part to IBM. Contact IBM Service and Support at 1-800-IBM-SERV
(1-800-426-7378) for more information on the return procedure.
Disposing of batteries
Dispose of batteries according to local regulations regarding battery recycling or
disposal.
About this task
For more information, see the IBM Environmental Notices and User Guide.
102
IBM System Storage: N6200 Series Hardware and Service Guide
For...
7-Mode
Clustered Data ONTAP
Note: The Data ONTAP System Administration Guide for 7-Mode or the Clustered
Data ONTAP System Administration Guide contains more information about
setting the system date and time.
The following command sets the date and time to 22 May 2012 at 9:25 a.m. on
a 7-Mode system:
date 201205220925
The following command sets the date and time to 22 May 2012 at 9:25 a.m. on
a Clustered Data ONTAP system:
system date modify -node system1 -date "05/22/2012 09:25:00"
Issue the command...
date [-u] [[[CC]yy]mmddhhmm>[.<ss>]]
-u sets the date and time to Greenwich
Mean Time instead of the local time.
CC is the first two digits of the current year.
yy is the second two digits of the current
year.
mm is the current month. If the month is
omitted, the default is the current month.
dd is the current day. If the day is omitted,
the default is the current day.
hh is the current hour, using a 24-hour clock.
mm is the current minute.
ss is the current second. If the seconds are
omitted, the default is 0.
system date modify -node node_name -date
date_and_time
node_name is the target node.
date_and_time is the date and time setting for
the node, in the format MM/DD/YYYY
HH:MM:SS.