Scene Select Setting; Using The Scene Select Setting Menu - Panasonic WV-CS954 Operating Instructions Manual

SCENE SELECT SETTING

■ Using the Scene Select Setting
Menu
Display the scene select setting menu from the setup
menu to configure scene select settings. First, display
the scene select setting menu.
1. Display the setup menu (page 21), move the cursor
to SCENE SELECT O, and then press the CAM
(SET) button.
This will display the scene select setting menu.
**SCENE SELECT**
SCENE
LOAD
RET TOP
● Scene Select Settings
Use the following procedure to configure scene select
settings.
1. Move the cursor to SCENE, and then tilt the joystick
left or right to change the scene setup.
INDOOR (L)
INDOOR (H)
OUTDOOR (L)
OUTDOOR (H)
Settings related to the picture switch depending on
the scene settings. Scene select settings and
relationship to other settings are shown in the table
below.
AGC
INDOOR (L) MID
INDOOR (H) HIGH
OUTDOOR (L) MID
OUTDOOR (H) HIGH
2. Move the cursor to LOAD, and then press the CAM
(SET) button.
This will cause the setup you selected for SCENE in
step 1 to be applied to the image.
INDOOR(L)
: Indoor setting (picture quality
priority)
: Indoor setting (sensitivity
priority)
: Outdoor setting
quality priority)
: Outdoor setting (sensitivity
priority)
SENS UP SHUTTER
OFF OFF
×2 AUTO
OFF
OFF AUTO
×2 AUTO
AUTO
(picture
BW DNR
OFF LOW
OFF HIGH
AUTO LOW
AUTO HIGH
-40-
WHITE BAL
ATW1
ATW1
ATW2
ATW2