Panasonic WV-CS954 Operating Instructions Manual page 49

Problem
The camera movement
mode (OFF, SEQ,
SORT, AUTO PAN,
PATROL, AUTO
TRACK) setting
changes.
Camera position is
different from the
preset position setting.
Picture is different from
the position setting.
Upper part of the picture
is black when the camera
is in a horizontal
orientation.
Camera suddenly starts
to pan by itself.
● Periodically check the power cord and plug.
Power cord sheathing is
damaged.
Power cord, connectors,
or power plug becomes
hot during operation.
Power cord becomes
warm or hot when it is
bent or stretched during
use.
Cause and Recommended Action
• Check the self return function.
• Perform REFRESH from the special setup menu.
• Adjust the picture using the preset menu and a
scene file.
• This is caused by the camera's internal cover. It
does not indicate malfunction.
• If the cleaning function is turned on, this is normal
does not indicate
CLEANING settings.
• If the cleaning function is not turned on, this
symptom could be due to noise.
• The power cord, connector, or power plug is damaged. Continued
use creates the risk of electric shock and fire. Immediately unplug
the power plug and contact a qualified service person or system
installer for servicing.
-49-
malfunction. Check
Reference Pages
30
39
27-29
35
35
the
8, 12