Shortcuts - Panasonic WV-CS954 Operating Instructions Manual

SHORTCUTS

Shortcuts are supported when you are using the system controller that has a CAM FUNCTION button. With shortcuts,
you can configure camera functions by inputting function codes on the 10-key pad and then pressing the CAM
FUNCTION button.
The following is a list of all of the shortcuts that are supported by this camera. In addition, you can also move the
camera to a preset position by inputting the applicable position number on the 10-key pad.
Notes:
• Turn off digital flip before registering preset positions. If NO REGS.; FLIP ON appears, do the setting again.
• Shortcuts may not be performed if they are executed while a pan, tilt, zoom, or focus operation is in progress.
• Shortcuts 1 through 64, 169, 170, and 301~556 can be saved as part of a patrol routine.
• Except for shortcuts 169 and 170, executing any shortcut during patrol routine PLAY will cause the PLAY
operation to stop.
Controller Operation
[6] + [5] + [CAM FUNCTION]
[6] + [6] + [CAM FUNCTION]
[6] + [7] + [CAM FUNCTION]
[6] + [8] + [CAM FUNCTION]
[6] + [9] + [CAM FUNCTION]
[7] + [0] + [CAM FUNCTION]
[7] + [1] + [CAM FUNCTION]
[7] + [2] + [CAM FUNCTION]
[7] + [3] + [CAM FUNCTION]
[7] + [4] + [CAM FUNCTION]
[7] + [6] + [CAM FUNCTION]
[7] + [7] + [CAM FUNCTION]
[7] + [8] + [CAM FUNCTION]
[7] + [9] + [CAM FUNCTION]
[8] + [0] + [CAM FUNCTION]
[8] + [1] + [CAM FUNCTION]
[8] + [4] + [CAM FUNCTION]
[8] + [5] + [CAM FUNCTION]
[8] + [6] + [CAM FUNCTION]
[8] + [7] + [CAM FUNCTION]
[8] + [8] + [CAM FUNCTION]
[8] + [9] + [CAM FUNCTION]
[9] + [0] + [CAM FUNCTION]
[9] + [1] + [CAM FUNCTION]
[9] + [2] + [CAM FUNCTION]
[9] + [3] + [CAM FUNCTION]
[9] + [4] + [CAM FUNCTION]
[9] + [5] + [CAM FUNCTION]
[9] + [6] + [CAM FUNCTION]
[9] + [7] + [CAM FUNCTION]
[1] + [0] + [0] + [CAM FUNCTION]
[1] + [0] + [1] + [CAM FUNCTION]
[1] + [6] + [4] + [CAM FUNCTION]
[1] + [6] + [5] + [CAM FUNCTION]
[1] + [6] + [6] + [CAM FUNCTION]
[1] + [6] + [7] + [CAM FUNCTION]
[1] + [6] + [9] + [CAM FUNCTION]
Setting
AUTO PAN ON
AUTO PAN OFF
Increases AUTO PAN speed one step.
Decreases AUTO PAN speed one step.
Sets AUTO PAN start point.
Sets AUTO PAN end point.
AUTO MODE: OFF
AUTO MODE SEQ: OFF
AUTO MODE SEQ: SORT ON
Reverses AUTO PAN range.
ENDLESS: ON
ENDLESS: OFF
DIGITAL FLIP: ON
DIGITAL FLIP: OFF
PROPO.P/T: ON
PROPO.P/T: OFF
SUPER-D 3: ON
SUPER-D 3: OFF
AF MODE: AUTO
AF MODE: MANUAL
Performs auto focus.
Moves to home position.
BW: ON
BW: OFF
BW: AUTO
CAMERA ID: ON
CAMERA ID: OFF
AREA TITLE: ON (NESW)
AREA TITLE: ON (USER)
AREA TITLE: OFF
Adjusts camera position (REFRESH)
Stores preset to first available preset number (1 to 64).
PATROL1: PLAY
PATROL 1 - PATROL 4: STOP
PATROL1: LEARN start
IRIS: OPEN
-44-