Panasonic WV-CS954 Operating Instructions Manual page 32

Color cctv camera
Hide thumbs Also See for WV-CS954:
Table of Contents

Advertisement

Available languages

Available languages

manually, the auto mode function should be
cancelled.
To activate the auto mode, select the desired
auto mode again or set a time for SELF RETURN
in the SET UP menu.
• When 0S is selected, the camera stops without
dwelling and starts.
• Auto refreshing may be activated during the patrol
play or the auto mode to calibrate the lens position.
(6) AUTO PAN Key Setting (AUTO PAN KEY)
Set the operations of the camera when AUTO PAN is
executed from the system controller (page 31, 32).
1. Move the cursor to AUTO PAN KEY, and then tilt the
joystick left or right to select a camera movement
mode setting.
Tilting the joystick cycles through settings in the
sequence shown below.
AUTO PAN ↔ SEQ ↔ SORT ↔ PATROL1 ↔ PATROL2
AUTO TRACK ↔ PATROL4 ↔ PATROL3
Note: Auto Mode can be started, but not stopped,
with the AUTO PAN key.
(7) Patrol Function Setting (PATROL)
The patrol function remembers manual operations for
later automatic playback when they are needed.
1. Aim the camera, with the menu closed, at the start
point of the routine you want it to remember.
2. Move the cursor to NUMBER, and then tilt the
joystick left or right to specify the number of patrol
routines.
Tilting the joystick cycles through settings in the
sequence shown below. The amount of storage
time available depends on the number of routines.
The storage time display changes in the sequence
shown below. (unit: sec, min)
1(2MIN) ↔ 2(1MIN) ↔ 4(30S)
Note that the total patrol time is two minutes, and
the time allowed for each routine depends on the
number of patrol routines that are configured. The
values in parentheses indicate the time of each
patrol routine (two minutes for one pattern, one
minute each for two patterns, 30 seconds each for
four patterns).
NUMBER
PATROL1*
PATROL2
PATROL3
PATROL4
RESET
RET TOP
If you want to change the number of patrol routines
from a previous setting, first delete all of the currently
store patrol routines. To delete everything, move the
cursor to RESET, and press the CAM (SET) button.
**PATROL**
4(30S)
PLAY
---
---
---
3. Move the cursor to a PATROL number (PATROL 1
through 4), and then tilt the joystick left or right to
select a patrol setting.
---
: Disables the selected patrol routine.
PLAY
: Performs the selected patrol routine.
LEARN : Select this option to teach the camera a
series of movements (patrol routine). (An
asterisk (*) to the right of a PATROL
number indicates that it already has a
patrol routine assigned to it.)
DEL→PUSH SET : Press the CAM (SET) button to
4. Turn off the menu display with the F2 button on the
system controller, and activate the patrol function
set in step 3.
Turning on the system controller's menu during a
LEARN operation causes the LEARN operation to
end. It also ends when the maximum storage time is
exceeded. Activate PLAY to check the stored
operations.
Notes:
• Selecting LEARN to teach the camera a patrol
routine causes the following parameters to be
stored along with the camera movements.
(1) Parameters at the Beginning of the Routine
• PAN, TILT, ZOOM, and FOCUS positions
• IRIS level
• Shutter speed (SHUTTER)
• Gain (AGC) setting
• Electronic sensitivity enhancement (SENS
UP) setting
• White balance (WHITE BAL) setting
• IMAGE HOLD
• AREA TITLE
• DIGITAL FLIP
• PRIVACY ZONE
• CAMERA ID
• PROPO.PT
• PAN LIMIT
• ZOOM LIMIT
• TILT ANGLE
• BURST
• CLEANING
(2) During Camera Movement
• PAN, TILT, ZOOM, and FOCUS positions
• IRIS operation
• Preset positioning
• In the patrol play mode, the camera movement
may occasionally deviate from the entered
routine when the routine includes a move to a
preset position. If this happens, re-enter the
routine of manual operations for patrol-learn.
• In the patrol play mode, black and white
automatic switching does not work.
• In the patrol play mode, when the power of the
system controller is turned on or off, the patrol
play stops. In this case, press the PATROL
PLAY button again. (If SELF RETURN is set to
ON, the patrol play will start again after elapsing
the setting return time.)
-32-
delete an existing patrol routine.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wv-cs950Wv-cs954e

Table of Contents