Selecting Audio Input Jacks (Audio Select) - Yamaha RX-V2700 Owner's Manual

PLAYBACK
Selecting audio input jacks
(AUDIO SELECT)
This unit comes with a variety of input jacks. Use this
feature (Audio input jack select) to switch the input jack
assigned to an input source when more than one jacks are
assigned to an input source.
y
• We recommend setting Audio input jack select to "AUTO" in
most cases.
• You can adjust the default Audio input jack select of this unit by
using "Audio Select" in "Option" (see page 105).
• You can also set Audio input jack select setting in "Audio
Select" in "Input Select" (see page 87).
1
Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the desired
input source.
INPUT
Front panel
2
Press AUDIO SELECT on the front panel (or
AUDIO SEL on the remote control) repeatedly
to select the desired Audio input jack select
setting.
AUDIO
SELECT
Available input sources
V-AUX DVR/VCR 2 VCR 1 CBL/SAT
NET/USB
A.SEL:
42
En
PHONO CD MULTI CH IN
V-AUX/DOCK CBL/SAT MD/TAPE CD-R
or
DTV VCR 1 DVR/VCR 2 DVD
Remote control
AUDIO SEL
or
DTV DVD
AUTO
Currently selected
Audio input jack
select setting
AUTO
Automatically selects input signals in
the following order:
(1)HDMI
(2)Digital signals
(3)Analog signals
HDMI
Selects only HDMI signals. When
HDMI signals are not input, no sound
is output.
COAX/OPT Automatically selects input signals in
the following order:
(1)Digital signals input at the
COAXIAL jack.
(2)Digital signals input at the
OPTICAL jack.
When no signals are input, no sound is
output.
ANALOG
Selects only analog signals. If no
analog signals are input, no sound is
output.
Note
This feature is not available when no digital input jack
(OPTICAL, COAXIAL and HDMI) are assigned. Use "I/O
Assignment" in "Input Select" to reassign the respective
input jack (see page 87).