Setting Remote Control Codes - Yamaha RX-V2700 Owner's Manual

Notes
*1
This button is operational only when the original remote control supplied with the component has a POWER button.
*2 These buttons operate your VCR only when you set the appropriate remote control code for VCR 1 (see page 111).
*3
These buttons always control your TV regardless of the operation mode selector position.
*4
Press and hold to search backward or forward.
*5
Simple remote mode (see page 66).
*6
Menu browse mode only (see page 66).
*7
Press and hold to store your favorite Internet Radio stations with bookmarks (see page 71).
*8
These buttons are not operational when the Internet Radio is selected as the sub input source of NET/USB.
*9
Press 1-8 to assign or recall the preset items (see page 72).
Selecting a component to be controlled
You can select a component to be controlled
independently of the input source selected with the input
selector buttons.
Press SELECT k / n repeatedly to select the
desired component.
The name of the component to be controlled appears in the
display window on the remote control.
SELECT
Controlling optional components
(Option mode)
"OPTN" is an optional component control area that can be
programmed with remote control functions independently
from any input source. This area is useful for
programming commands that are to be used only as a part
of a macro function or for components that do not have a
valid remote control code.
To select the option mode, press SELECT n
repeatedly until "OPTN" appears in the display
window on the remote control.
SELECT
Note
You cannot set a remote control code for the optional area. See
page 113 to program buttons operated within this component
control area.

Setting remote control codes

You can control other components by setting the
appropriate remote control codes. Codes can be set up for
each input area. For a complete list of available remote
control codes, refer to "LIST OF REMOTE CONTROL
CODES" at the end of this manual.
The following table shows the default component
(Library: component category) and the remote control
code for each input area.
Remote control code default settings
Library
Input area (component
category)
TAPE
NET/USB TUNER
PHONO TV
TUNER TUNER
CD CD
MULTI CH
DVD
INPUT
V-AUX/
TUNER
DOCK
CBL/SAT CABLE
MD/TAPE MD
CD-R CD-R
DTV TV
VCR 1 VCR
DVR/VCR2 DVR
DVD DVD
Note
You may not be able to operate your YAMAHA component even
if a YAMAHA remote control code is preset as listed above.
In this case, try setting another YAMAHA remote control code.
REMOTE CONTROL FEATURES
Default
Manufacturer
code
YAMAHA 2700
YAMAHA 2607
– –
YAMAHA 2602
YAMAHA 2300
YAMAHA 2100
YAMAHA 2606
– –
YAMAHA 2500
YAMAHA 2400
– –
– –
YAMAHA 2807
YAMAHA 2100
111
En