Yamaha RX-V2300 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Receiver
  5. RX-V2300
  6. Owner's manual

Yamaha RX-V2300 Owner's Manual

Yamaha av receiver owner's manual
Hide thumbs Also See for RX-V2300:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
U
RX-V2300
AV Receiver
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Yamaha RX-V2300

Summary of Contents for Yamaha RX-V2300

  • Page 1 RX-V2300 AV Receiver OWNER’S MANUAL...

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous...
  • Page 3 This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables.
  • Page 4 YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

  • Page 5: Table Of Contents

    INTRODUCTION CONTENTS ... 1 FEATURES ... 2 GETTING STARTED ... 3 Checking the Package Contents ... 3 Installing Batteries in the Remote Control ... 3 CONTROLS AND FUNCTIONS ... 4 Front Panel ... 4 Remote Control ... 6 Using the Remote Control ... 7 Front Panel Display ...

  • Page 6: Features

    N Dolby Pro Logic/Dolby Pro Logic N Dolby Digital/Dolby Digital EX Decoder N DTS/DTS ES Matrix 6.1, Discrete 6.1, DTS Neo: 6 Decoder N CINEMA DSP: Combination of YAMAHA DSP Technology and Dolby Pro Logic, Dolby Digital or DTS N Virtual CINEMA DSP...

  • Page 7: Getting Started

    Checking the Package Contents Check your package to make sure it has the following items. Batteries (3) (R6) Remote control MACRO TRANSMIT RE-NAME CLEAR LEARN MACRO SYSTEM POWER STANDBY PHONO V-AUX TUNER MD/TAPE CD-R D-TV/LD CBL/SAT VCR 1 VCR2/DVR 6CH INPUT TITLE ENTER SOURCE...

  • Page 8: Controls And Functions

    CONTROLS AND FUNCTIONS Front Panel NATURAL SOUND AV RECEIVER RX-V2300 STANDBY INPUT MODE D–TV/LD SPEAKERS BASS PROCESSOR CBL/SAT EXTENSION DIRECT VCR 1 VCR2 /DVR V–AUX STANDBY/ON Turns on and sets this unit in the standby mode. When you turn on this unit, you will hear a click and there will be a 4 to 5-second delay before this unit can reproduce sound.
  • Page 9 REC OUT/ZONE 2 (U.S.A., Canada and Australia models) Selects the source you want to direct to the audio/video recorder and ZONE 2 outputs independent of the source you are listening to or watching in the main room. When set to the SOURCE/REMOTE position, the input source is directed to all outputs.

  • Page 10: Remote Control

    CONTROLS AND FUNCTIONS Remote Control This section describes the controls and their functions of the remote control. See “REMOTE CONTROL FEATURES” on pages 43 to 56 for operating other components with this remote control. TRANSMIT RE-NAME CLEAR LEARN MACRO SYSTEM POWER STANDBY V-AUX...

  • Page 11: Using The Remote Control

    Slides down to use the various setup buttons. Slides up when these buttons are not being used. CONTROLS AND FUNCTIONS Using the Remote Control VOLUME NATURAL SOUND AV RECEIVER RX-V2300 D I G I T A L STANDBY INPUT MODE...

  • Page 12: Front Panel Display

    CONTROLS AND FUNCTIONS Front Panel Display V AUX VCR2/DVR DTS Neo DISCRETE MATRIX MOVIE TV THEATER VIRTUAL DIGITAL SILENT PRO LOGIC indicator Lights up when you select a digital sound field program. Decoder indicators When any of the decoders equipped on this unit functions, the indicator lights up.

  • Page 13: Rear Panel

    Rear Panel AUDIO AUDIO VIDEO DIGITAL OUTPUT OPTICAL VIDEO MD/TAPE (PLAY) MD/TAPE CD-R D-TV (REC) (PLAY) /SAT CD-R CD-R (REC) VCR 1 /SAT PHONO VCR 2 /DVR MAIN SURROUND D-TV COAXIAL ZONE 2 OUT MONITOR OUT CENTER WOOFER VIDEO S VIDEO DIGITAL INPUT 6CH INPUT...

  • Page 14: Preparation

    LFE (low-frequency effect) channel with high fidelity when the Dolby Digital signal or the DTS signal is played back. The YAMAHA Active Servo Processing Subwoofer System is ideal for natural and lively bass reproduction. SPEAKER SETUP...

  • Page 15: Connecting The Speakers

    Connecting the Speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.
  • Page 16 I SUBWOOFER jack When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or rear channels are directed to this jack if they are assigned to this jack.

  • Page 17: Impedance Selector Switch

    I IMPEDANCE SELECTOR switch WARNING Do not change the IMPEDANCE SELECTOR switch setting while the power of this unit is on, otherwise this unit may be damaged. If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE SELECTOR switch may not be fully slid to either position.

  • Page 18: Connections

    Before Connecting Components CAUTION Never connect this unit and other components to mains power until all connections between components have been completed. • Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”.
  • Page 19 OPTICAL OUTPUT AUDIO OUTPUT DIGITAL OUTPUT AUDIO AUDIO OPTICAL MD/TAPE ( PLAY ) MD/TAPE CD-R ( REC ) ( PLAY ) CD-R CD-R ( REC ) /SAT PHONO MAIN SURROUND D-TV COAXIAL ZONE 2 OUT MONITOR OUT CENTER WOOFER DIGITAL INPUT 6CH INPUT AUDIO OUTPUT...
  • Page 20 CONNECTIONS DIGITAL OUTPUT OPTICAL MD/TAPE ( PLAY ) MD/TAPE CD-R ( REC ) ( PLAY ) CD-R CD-R ( REC ) /SAT PHONO MAIN SURROUND D-TV COAXIAL DIGITAL INPUT VIDEO OUTPUT AUDIO INPUT AUDIO OUTPUT indicates signal direction indicates left audio pin cables indicates right audio pin cables indicates optical cables indicates video pin cables...

  • Page 21: Connecting Audio Components

    Connecting Audio Components I Connecting to digital jacks This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables. You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. When you connect components to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack.
  • Page 22 CONNECTIONS OPTICAL INPUT OPTICAL OUTPUT CD player OUTPUT COAXIAL OUTPUT (U.S.A. and Canada models) OUTPUT Turntable indicates signal direction indicates left analog cables indicates right analog cables indicates optical cables indicates coaxial cables INPUT MD recorder or tape deck OUTPUT DIGITAL OUTPUT AUDIO OPTICAL...

  • Page 23: Connecting The Antennas

    AM antenna is connected to this unit. A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas. CONNECTIONS...

  • Page 24: Connecting To An External Amplifier

    Rear channel line output jacks. SUBWOOFER jack When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or rear channels are directed to this jack if they are assigned to this jack.

  • Page 25: Connecting The Power Supply Cords

    Connecting the Power Supply Cords AC IN AC OUTLETS EDANCE SELECTOR T BEFORE POWER ON A OR B: 4 MIN. /SPEAKER A+B: 8 MIN. /SPEAKER 6 MIN. /SPEAKER CENTER : 6 MIN. /SPEAKER 6 MIN. /SPEAKER AIN A OR B: 8 MIN.

  • Page 26: Turning On The Power

    CONNECTIONS Turning on the Power When all connections are completed, turn on the power of this unit. NATURAL SOUND AV RECEIVER RX-V2300 D I G I T A L STANDBY INPUT MODE SOURCE PRESET/ PRESET TUNING /REMOTE A/B/C/D/E TUNING /TUNING...

  • Page 27: On-Screen Display (Osd)

    ON-SCREEN DISPLAY (OSD) You can display the operation information for this unit on a video monitor. If you display the SET MENU and DSP program parameter settings on a monitor, it is much easier to see the available options and parameters than it is by reading this information on the front panel display.

  • Page 28: Speaker Mode Settings

    This unit has 7 SPEAKER SET items on the SET MENU that you must set according to the number of speakers in your configuration and their size. The following table summarizes these SPEAKER SET items, and shows the initial settings as well as other possible settings.

  • Page 29: Adjusting The Speaker Output Levels

    • Since this unit cannot enter the test mode while headphones are connected to this unit, be sure to unplug the headphones from the PHONES jack when using the test tone. Before You Begin NATURAL SOUND AV RECEIVER RX-V2300 D I G I T A L STANDBY INPUT...
  • Page 30 ADJUSTING THE SPEAKER OUTPUT LEVELS LEFT RIGHT CENTER SUBWOOFER LEFT SURROUND RIGHT SURROUND REAR CENTER The test tone is heard from the left main speaker, center speaker, right main speaker, right rear speaker, rear center speaker, left rear speaker and subwoofer in order.

  • Page 31: Basic Playback

    NATURAL SOUND AV RECEIVER RX-V2300 D I G I T A L STANDBY INPUT MODE PRESET/ SOURCE PRESET TUNING /REMOTE A/B/C/D/E TUNING FM/AM MEMORY MODE /TUNING MD/TAPE D–TV/LD CD–R SPEAKERS BASS PROCESSOR CBL/SAT TUNER MAN'L/AUTO FM AUTO/MAN'L MONO EDIT EXTENSION...

  • Page 32: This Unit

    BASIC PLAYBACK Start playback or select a broadcast station on the source component. Refer to the operation instructions for the component. Note • If you playback a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals.

  • Page 33: Input Modes And Indications

    Input Modes and Indications This unit comes with various input jacks. You can set the priority of the input signal among different types of input signals. When you turn on the power of this unit, the input mode is set according to “8 INPUT MODE” on the SET MENU (see page 64 for details).

  • Page 34: Selecting A Sound Field Program

    For details about each program, see pages 33 to 37. NATURAL SOUND AV RECEIVER RX-V2300 D I G I T A L STANDBY INPUT...

  • Page 35: Selecting Pro Logic, Pro Logic

    You can enjoy the 2-channel sources decoded into five or six discrete channels by selecting PRO LOGIC, PRO LOGIC or Neo: 6 in the program No. 11. NATURAL SOUND AV RECEIVER RX-V2300 D I G I T A L STANDBY INPUT...

  • Page 36: Normal Stereo Reproduction

    BASIC PLAYBACK Notes • Some 6.1-channel compatible discs do not have a signal (flag) which this unit can automatically detect. When playing these kinds of discs with 6.1-channel, select “Matrix 6.1”. • 6.1-channel playback is not possible even if EX/ES is pressed in the following cases: –...

  • Page 37: Digital Sound Field Processing (Dsp)

    The traditional stereo system that uses only two speakers is not capable of recreating a realistic sound field. YAMAHA’s DSP requires four effect speakers to recreate sound fields based on the measured sound field data. The processor controls the strength and delay time of the signals output from the four effect speakers to localize the virtual sound sources in a full circle around the listener.

  • Page 38: Straight Decode

    DTS Neo: 6 equipped on this unit decode the 2-channel Dolby Surround software into five or six full range channels. They also provide two modes; MOVIE/CINEMA for movies and MUSIC for 2-channel sources. These programs use YAMAHA’s tri-field DSP processing on each of the Dolby Digital or DTS signals for the front, left surround and right surround channels.

  • Page 39: Features Of Dsp Programs

    Features of DSP Programs The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. Type of Program sources CONCERT HALL 1...
  • Page 40 DIGITAL SOUND FIELD PROCESSING (DSP) Type of Program sources MOVIE THEATER 1 MOVIE THEATER 2 For movie programs DOLBY DIGITAL DTS DIGITAL PRO LOGIC DOLBY DIGITAL DTS DIGITAL PRO LOGIC PRO LOGIC DTS Neo:6 Sub program Spectacle This program creates the extremely wide sound field of a 70-mm movie theater.

  • Page 41: Table Of Program Names For Each Input Format

    Table of Program Names for Each Input Format Input 2 channel Stereo Program MOVIE 70 mm Spectacle THEATER 1 70 mm Sci-Fi MOVIE 70 mm Adventure THEATER 2 70 mm General DOLBY — DIGITAL — DTS DGTL — — PRO LOGIC Normal Enhanced PRO LOGIC...

  • Page 42: Tuning

    There are 2 ways of tuning; automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. I Automatic tuning NATURAL SOUND AV RECEIVER RX-V2300 D I G I T A L STANDBY INPUT...

  • Page 43: Presetting Stations

    40 (8 stations x 5 groups) of those stations in order. This feature enables you to easily tune in to any preset station by selecting the preset station number (see page 41). NATURAL SOUND AV RECEIVER RX-V2300 D I G I T A L STANDBY INPUT...
  • Page 44 TUNING I Manually presetting stations You can also store up to 40 stations (8 stations x 5 groups) manually. NATURAL SOUND AV RECEIVER RX-V2300 D I G I T A L STANDBY INPUT MODE SOURCE PRESET/ PRESET TUNING /REMOTE A/B/C/D/E...

  • Page 45: Tuning In To A Preset Station

    Tuning in to a Preset Station You can tune any desired station simply by selecting the preset station number under which it was stored. NATURAL SOUND AV RECEIVER RX-V2300 D I G I T A L STANDBY INPUT MODE SOURCE...

  • Page 46: Basic Recording

    Recording adjustments and other operations are performed from the recording components. Refer to the operation instructions for these components. NATURAL SOUND AV RECEIVER RX-V2300 D I G I T A L STANDBY INPUT MODE...

  • Page 47: Remote Control Features

    REMOTE CONTROL FEATURES The remote control can operate other A/V components of YAMAHA and other manufacturers as well as this unit. To control those components, you must set up remote control with the manufacturer codes. This remote control also has two sophisticated features: Learn and Macro. The Learn feature allows it to acquire functions from the remote controls of other components in your system (or other household appliances) equipped with an infrared remote control receiver.

  • Page 48: Setting The Manufacturer Code

    CBL/SAT CABLE Note • You may not be able to operate your Yamaha component even if Yamaha manufacture code is initially set as listed above. In this case, try to set other Yamaha manufacture code(s). Press an input selector button, Å or ı to...

  • Page 49: Learn Feature

    • Supplied remote control does not store all the manufacturer codes for commercially availabvle AV components (including Yamaha AV components). Therefore it may not work to operate your AV component. If operation is not possible with any of the manfacturer codes, program the new remote control function with the Learn feature (see page 45) or use the remote control for the component.

  • Page 50: Changing The Source Name In The Display Window

    REMOTE CONTROL FEATURES Press and hold the button on the other remote control that has the function you want to program into this remote control until “OK” appears in the display window. Notes • “NG” appears in the display window when programming has not been done correctly.

  • Page 51: Using The Macro Feature

    POWER STANDBY *1 In order to turn on some components (including YAMAHA components) connected to this unit, connect those components to the AC OUTLET(S) on the rear panel. (Power control may not be synchronized with this unit depending on the component. For details, please refer to the operation instruction for the connected component.) *2 If the macro you select includes power control functions, the component may be turned off if it is already on when you press the macro button.
  • Page 52 • A macro programming is used to transmit learning or setup (or YAMAHA preset) button signals of this remote control to a macro button. If necessary, set up the manufacturer code or program a function with the remote control for your component.

  • Page 53: Clearing Learned Functions, Macros, Renamed Source Names, And Setup Manufacturer Codes

    Press MACRO again when the operation sequence you want to program is complete. Note • “ERROR” appears in the display when pressing butons other than indicated in each step, or more than one button at once. Memory back-up If the remote control is without batteries for more than 3 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared.

  • Page 54: Clearing A Learned Function

    REMOTE CONTROL FEATURES Clearing a Learned Function You can clear the function learned in a certain programmable button in each area. Press an input selector button, Å or ı to select the source component you want to clear the function. The selected component name appears in the display window.
  • Page 55 I SOURCE SELECT k / n You can control another component independently from the input you have selected by pressing an input selector button. Press SOURCE SELECT k / n to choose the component and set the remote control to be used for it.

  • Page 56: Each Component Control Area

    REMOTE CONTROL FEATURES Each Component Control Area The general operational buttons are shown for each area. Some of them may not function depending on the component you have. After setting the manufacturer code, press an input selector button, Å / ı, or SELECT k / n to select a component you want to control.
  • Page 57 I Operating a TV/digital TV (D-TV/LD area) or a cable TV/satellite TV (CBL/ SAT area) DISPLAY POWER Enter TV INPUT TV VOL +/– TV MUTE * SEARCH, REC, STOP, PAUSE and PLAY function to operate your VCR without switching the input to VCR 1 if the manufacturer code is set in VCR 1.
  • Page 58 REMOTE CONTROL FEATURES I Operating a CD player (CD area) DISPLAY SEARCH POWER STOP INDEX * TV VOL +/–, TV INPUT, and TV MUTE function to operate your TV without switching the input if the manufacturer code is set in D-TV/LD or PHONO. When the manufacturer code for your TV is set up in the both D- TV/LD and PHONO areas, priority is given to the signal in the D-TV/LD area.
  • Page 59 I Operating a tape deck (MD/TAPE area) SEARCH backward/forward Record STOP INDEX * TV VOL +/–, TV INPUT, and TV MUTE function to operate your TV without switching the input if the manufacturer code is set in D-TV/LD or PHONO. When the manufacturer code for your TV is set up in the both D- TV/LD and PHONO areas, priority is given to the signal in the D-TV/LD area.
  • Page 60 Å and ı, and the function for each button differs depending on the component. YAMAHA LD player is factory-set in Å and sattellite tuner in ı. However if you want to set other component, set the manufacturer code for the component you want to set in the Å / ı button following the manufacturer code setting procedure described on page 44.

  • Page 61: Set Menu

    ADVANCED OPERATION The SET MENU consists of 16 items including the speaker mode setting, center graphic equalizer and parameter initialization features. Choose the appropriate item and adjust or select the values as necessary. • You can adjust the items on the SET MENU while playing a source.

  • Page 62: Speaker Set (Speaker Mode Settings)

    SET MENU Press –/+ repeatedly to change the setting of the item. Press k / n repeatedly until the current DSP program appears or simply press one of the DSP program group buttons to exit from the SET MENU. 10KEY CONCERT THEATER 1 Memory back-up...
  • Page 63 I 1B MAIN SP (main speaker mode) The OSD shows large or small main speakers depending on how you set this item. Choices: LARGE, SMALL Initial setting: LARGE LARGE Select this if you have large main speakers. The entire range of the left and right main channel signal is directed to the left and right main speakers.
  • Page 64 SET MENU I 1D REAR CT SP (rear center speaker mode) By adding a rear center speaker to your speaker configuration, this unit can provide more realistic front- to-back and transitions. The initial setting is “LRG”. Note • If “1C REAR L/R SP” is set to NONE, “1D REAR CT SP” will be skipped.

  • Page 65: Low Frq Test

    I 1F MAIN LEVEL (main level mode) Change this setting if you cannot match the output level of the center, rear (L/R) and rear center speakers with the main speakers because of the unusually high-efficiency performance of the main speakers. Choices: Normal, –10 dB Initial setting: Normal Normal...

  • Page 66: R Balance (Balance Of The Left And Right Main Speakers)

    SET MENU Press n to go to “FRQ” and press –/+ to select the frequency you want to use. Adjust the volume of the subwoofer with the controls on the subwoofer so it matches that of the speaker you are comparing it to. I About the test tone The test tone is produced by the tone generator.

  • Page 67: Input Rename

    6 INPUT RENAME Use this feature to change the name of the input which appears on the OSD or the front panel display. Press an input selector button to select the input you want to change the name of. Press –/+ to place the _ (under-bar) under the space or the character you want to edit.

  • Page 68: Input Mode (Initial Input Mode)

    SET MENU I 7C OPTICAL IN for OPTICAL INPUT jacks (3) to (6) Choices: (3) CD, PHONO, VCR 2/DVR, VCR 1, CBL/SAT, D-TV/LD, DVD, MD/ TAPE, CD-R (4) CD-R, CD, PHONO, VCR 2/DVR, VCR 1, CBL/SAT, D-TV/LD, DVD, MD/TAPE (5) DVD, MD/TAPE, CD-R, CD, PHONO, VCR 2/DVR, VCR 1, CBL/ SAT, D-TV/LD (6) CBL/SAT, D-TV/LD, DVD, MD/...

  • Page 69: Param. Ini (Parameter Initialization)

    9 PARAM. INI (parameter initialization) Use this feature to initialize the parameters for each DSP program within a DSP program group. When you initialize a DSP program group, all of the parameter values within that group revert to their initial settings. Press the corresponding numeric button for the DSP program that you want to initialize.

  • Page 70: 12Sp Delay

    SET MENU 12 SP DELAY Use this feature to adjust the delay of the Center and the Rear Center channel sounds. This feature works when there is sound output from the center speakers with a source like Dolby Digital or DTS, etc. Ideally, the Center speaker and the Rear Center speaker should be the same distance from the main listening position as the left and right Main speakers.

  • Page 71: 13Display Set

    13 DISPLAY SET I DIMMER You can adjust the brightness of the front panel display. Control range: –4 to 0 Initial setting: 0 I OSD SHIFT (OSD off-set position) This setting is used to adjust the vertical position of the OSD.

  • Page 72: 156Ch Input Set

    SET MENU 15 6CH INPUT SET Use this feature to set the direction of the signals input into the center and subwoofer channels when the source component is connected to the 6CH INPUT jacks. I 15A CENTER to (direction of the center channel signals) This item sets the direction of the signals input into the CENTER jack.

  • Page 73: Adjusting The Level Of The Effect Speakers

    ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS You can adjust the output level of each effect speaker (center, left and right rear, rear center and subwoofer) while listening to a music source. Adjustment should be made with the remote control. A/B/C/D/E PRESET TV INPUT...

  • Page 74: Sleep Timer

    Use this feature to automatically set this unit in the standby mode after the amount of time you have set. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off the external components connected to AC OUTLET(S).

  • Page 75: Zone 2 (For U.s.a., Canada And Australia Models)

    Zone 2 connections which will best meet your requirements. This unit • Some YAMAHA models are able to connect directly to the REMOTE CONTROL OUT jack of this unit. If you own these products, you may not need to use an infrared emitter. Up to 6 YAMAHA components can be connected as shown.

  • Page 76: Remote Control In Zone 2

    ZONE 2 I Special considerations when using DTS software The DTS signal is a digital bitstream. Therefore, if you attempt to send the DTS signal to the second room, you will only be able to hear the digital noise sound that could damage your speakers.

  • Page 77: Sound Field Program Parameter Editing

    In each program, these parameters are set with values precisely calculated by YAMAHA to create a sound field unique to the program. It is recommended to use DSP programs without changing the values of parameters; however, this unit also allows you to create your own sound fields.

  • Page 78: Changing Parameter Settings

    SOUND FIELD PROGRAM PARAMETER EDITING Changing Parameter Settings You can enjoy good quality sound with the factory-set parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room. 10KEY HALL 1 HALL 2...

  • Page 79: Digital Sound Field Parameter Descriptions

    DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your listening room. Not all of the following parameters are found in every program. I DSP LEVEL Function: This parameter adjusts the level of all the DSP effect sounds within a narrow range.
  • Page 80 DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS I LIVENESS Function: This parameter adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the early reflections decay. Description: The early reflections of a sound source decay much faster in a room with acoustically absorbent wall surfaces than in one which has highly reflective surfaces.
  • Page 81 I REV. TIME (Reverberation Time) Function: This parameter adjusts the amount of time it takes for the dense, subsequent reverberation sound to decay by 60 dB (at 1 kHz). This changes the apparent size of the acoustic environment over an extremely wide range.
  • Page 82 DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS For 6ch Stereo I CT LEVEL (Center Level) Function: These parameters adjust the volume level for each channel in 6-channel stereo mode. I RL LEVEL (Rear Left Level) Function: These parameters adjust the volume level for each channel in 6-channel stereo mode. I RR LEVEL (Rear Right Level) Function: These parameters adjust the volume level for each channel in 6-channel stereo mode.

  • Page 83: Troubleshooting

    Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit in the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center. I General...
  • Page 84 TROUBLESHOOTING Problem The sound suddenly The protection circuit has been activated goes off. because of a short circuit, etc. The sleep timer has functioned. The sound is muted. Only the speaker on Incorrect cable connections. one side can be heard. Incorrect setting of “3 L/R BALANCE”...
  • Page 85 Problem Dolby Digital or DTS “Digital output” and “Dolby Digital” or sources cannot be “DTS” are not selected on the connected played. (Dolby Digital or components. DTS indicator on the front panel display does not light up.) Poor bass “1E LFE/BASS OUT” on the SET reproduction.
  • Page 86 TROUBLESHOOTING Problem The sound is degraded This unit is in the standby mode. when listening with headphones connected to a tape deck or CD player that is connected to this unit. There is noise This unit is too close to the digital or high- interference from digital frequency equipment.
  • Page 87 I Remote control Problem The remote control Wrong distance or angle. does not work nor function properly. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. The batteries are weak. The manufacturer code has not been correctly set.

  • Page 88: Glossary

    Based on a wealth of actually measured data, YAMAHA CINEMA DSP uses YAMAHA original sound field technology to combine Dolby Pro Logic, Dolby Digital and DTS systems to provide the visual and audio experience of movie theater in the listening room of your own home.
  • Page 89 I Virtual CINEMA DSP YAMAHA has developed a virtual CINEMA DSP algorithm that allows you to enjoy DSP sound field surround effects even without any rear speakers by using virtual rear speakers. It is even possible to enjoy virtual CINEMA DSP in a minimum two-speaker system that does not include a center speaker.

  • Page 90: Specifications

    AUDIO SECTION • Minimum RMS Output Power for Main, Center, Rear, R. Center 20 Hz to 20 kHz, 0.04% THD, 8 • Maximum Power (EIAJ) [China and General models] 1 kHz, 10% THD, 8 • Dynamic Power (IHF) 8/6/4/2 • Damping Factor (IHF) 20 Hz to 20 kHz, 8 •...
  • Page 91 YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN Printed in Malaysia V958390-1 YAMAHA MUSIC AUSTRALIA PTY, LTD.

Table of Contents