Subaru WRX Owner's Manual page 218

2. Operate the or
select the On/Off item. Then push the
button.
3. The current setting will be displayed.
Push the button to enter the selection
mode.
switch to 4. Select On or Off by operating the
or switch. Then push the
button.
5. Select Set by operating the
switch, and confirm the setting by pushing
the button.
Instruments and controls/Multi function display
6. The system will notify you that the
setting is complete.
Clear setting
1. Perform the preparation steps accord-
ing to Preparation for maintenance set-
tings 3-81.
3-83
CONTINUED