When Access Key Does Not Operate Properly; Replacing Battery Of Access Key; Replacing Access Key; Certification For Keyless Access With Push-Button - Subaru WRX Owner's Manual

Hide thumbs Also See for WRX:
Table of Contents

Advertisement

2-18
Keys and doors/Keyless access with push button start system
7. Within 10 seconds after step 6 is
performed, close and open the driver s
door once.
8. Within 5 seconds after step 7 is
performed, close the door. A chirp sound
will be heard, and the functions will be
disabled.
NOTE
In steps 4 and 6, press the power door
locking switch slowly. If the switch is
pressed quickly, the functions may not
be disabled.
Enabling functions
When the procedure to disable the func-
tions is performed again, the functions are
enabled.
A chirp sound will be heard once.
NOTE
. The keyless access function will be
enabled only if you perform the proce-
dure in the same manner you disabled
the function (for example, when dis-
abling by operating the driver s door,
the function will not be enabled even if
you operate the access key).
. Press the push-button ignition
switch if you do not know the proce-
dure in which the keyless access
function was disabled.
When disabling by operating the
driver s door: a chirp will not be
heard
When disabling by operating the
access key: a chirp will be heard
When access key does not
operate properly
Refer to Access key
if access key does
not operate properly
9-16.
Replacing battery of access
key
Refer to Replacing battery of access key
11-50.

Replacing access key

Access keys can be replaced at SUBARU
dealers. For more details, contact a
SUBARU dealer.
Certification for keyless ac-
cess with push-button start
system
U.S.-spec. models
FCC ID: HYQ13CZZ
FCC ID: HYQ14AHC
FCC ID: Y8PSSPIMB02
FCC ID: Y8PSSPLF02
CAUTION
FCC WARNING
Changes or modifications not ex-
pressly approved by the party re-
sponsible for compliance could void
the user s authority to operate the
equipment.
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including interference that
may cause undesired operation.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wrx sti

Table of Contents