Subaru WRX Owner's Manual page 221

3-86
Instruments and controls/Multi function display
Keyless buzzer volume setting
1. Perform the preparation steps accord-
ing to Preparation for car settings
2. Operate the or
select the Keyless Buzzer Volume item.
Then push the button.
3. Select a volume level by operating the
or switch, and confirm the setting
3-85. by pushing the
switch to 4. The system will notify you that the
setting is complete.
If the setting is not available, the following
notification will be displayed. In this case,
perform the setting procedure again.
button.
1. Perform the preparation steps accord-
ing to Preparation for car settings
2. Operate the
select the Hazard Warning Flasher item.
Hazard warning flasher setting
or
3-85.
switch to