Auto-Dimming Mirror/Compass (If Equipped) - Subaru WRX Owner's Manual

3-106
Instruments and controls/Mirrors
Auto-dimming mirror/com-
pass (if equipped)
1) Display
2) Switch
Congratulations! Your new automobile is
equipped with an automatic dimming
mirror manufactured by Gentex Corpora-
tion. During nighttime driving, the auto-
dimming feature senses distracting glare
from vehicle headlights behind you and
automatically dims to eliminate the glare
and preserve your vision.
To Operate the Auto-Dimming Fea-
ture
Press the switch to turn the auto-
dimming feature on/off. The auto-dimming
feature is enabled when the switch s
green LED indicator is on. The auto-
dimming feature will default to on with
each ignition cycle.
To Operate the Compass Feature
1. To turn the compass feature on/off,
press and hold the switch for more
than 3 seconds or until the display turns
on/off. The compass feature will default to
on with each ignition cycle.
2. If the display reads C , slowly drive
the vehicle in circles until compass is
calibrated.
Compass calibration zones
3. To adjust for compass zone variance:
(1) Find your current location and
zone number on the map.
(2) Press and hold the
more than 6 seconds or until a zone
number appears in the display.
(3) Once the zone number appears in
the display, toggle the
again until your current location zone
number appears. After you stop press-
ing the switch, your new zone number
will be saved. Within a few seconds,
the display will show a compass
direction.
4. If the vehicle s magnetics have chan-
ged or if the compass appears inaccurate,
recalibrate the compass. Press and hold
the switch for more than 9 seconds or
until a C appears in the display. Once a
C appears in the display, slowly drive the
vehicle in circles until compass is cali-
brated.
switch for
switch