Preparing Coffee Specialities; Preparing Coffee Or Espresso - SEVERIN S2+ One Touch Instruction Manual

The device is operated using the e-Select and the control buttons.
• Use e-Select to select a beverage: prepare it by pressing.
- The e-Select lights up steady white if the device is waiting for an input
from you.
- The e-Select flashes while the device is preparing a beverage.
- The e-Select flashes red if an error has occurred (►"9. Troubleshoot-
ing").
• By pressing the four control buttons below the display, you can adjust
your coffee speciality to suit your individual needs.
"Device menu" view
GB
In this menu, you can make settings, perform maintenance programs and
display information.
• By pressing the menu button for a longer time (at least 3 seconds), you
will reach the menu; you can exit it by pressing again.
• By turning the e-Select, you can select a menu option; confirm it by
pressing.
- The e-Select lights up steady white if the device is waiting for an input
from you.
- The e-Select flashes while the device is cleaning itself.
• Use the button under the display field
without changing the setting.
6.3

Preparing coffee specialities

1. Open the cover of the bean container and wipe the bean container out
with a dry and lint-free cloth.
46
to return to the previous menu
2. Fill the bean container with coffee beans (Fig. 4).
3. Close the cover of the bean container.

6.3.1 Preparing coffee or espresso

To prepare a coffee or espresso, there must be enough beans in the bean
container and enough water in the water tank.
1. Place a cup on the cup tray below the coffee-milk dispenser of the
device and adjust the height of the coffee-milk dispenser to the cup
height (Fig. 5).
2. By turning the e-Select, select
3. If desired, you can use the button under the display field
• to change the set coffee strength
• to change the set water quantity.
NOTE!
To prepare the coffee speciality with your own
settings, press the respective button until
displayed after the corresponding symbol (►"7.2
Making individual settings for coffee preparation").
4. Press the e-Select.
The desired coffee speciality is prepared.
Â
5. If you would like to change the coffee quantity during dispensing, turn
the e-Select while the coffee is being dispensed.
The display shows a bar with the set quantity in "ml".
Â
The coffee dispensing stops automatically after the selected quan-
tity has been prepared. It can also be stopped early by pressing
the e-Select.
or .
COFFEE ESPRESSO
is
Version 3 2012-08