SEVERIN S2+ One Touch Instruction Manual page 48

GB
fig. 6: Connecting the milk tube
NOTE!
To prepare the coffee speciality with your own
settings, press the respective button until
displayed after the corresponding symbol (►"7.2
Making individual settings for coffee preparation").
5. Press the e-Select.
The desired coffee speciality is prepared.
Â
6. If you would like to change the milk quantity during dispensing, turn the
e-Select while the milk is being dispensed.
The display shows a bar with the set milk dispensing time in
Â
seconds.
7. If you would like to change the coffee quantity during dispensing, turn
the e-Select while the coffee is being dispensed.
48
fig. 7: Turning over the powder dosing chamber
The display shows a bar with the set quantity in "ml".
Â
The coffee dispensing stops automatically, but can also be
stopped by pressing e-Select.
is
After preparation, the display indicates:
DO YOU WANT TO CLEAN THE MILK SYSTEM?
8. Press
• the button under the display field
(►"8.2.2 Cleaning milk system"), or
• the button under the display field
cleaning later.
to perform cleaning
if you want to perform the
NOTE!
It is recommended that you clean the milk system
after each preparation.
Version 3 2012-08