Storing Personal Settings; Making Personal Settings Quickly (Quick Select); Changing Device Settings; Language - SEVERIN S2+ One Touch Instruction Manual

NOTE!
– The total fill quantity of the cup for beverages
prepared with milk consists of the coffee quan-
tity plus the milk/milk froth quantity! Take this
into account when selecting your cup.
– The pause time influences the layering for a
latte macchiato.

7.2.1 Storing personal settings

Here's how to make your own settings for the coffee preparation:
1. Press the menu button for at least 3 seconds and use the e-Select to
GB
select the
.
BEV. SETT. MENU
The display shows a list with the coffee specialities.
Â
2. Select the coffee speciality whose settings you would like to change.
The display shows the setting possibilities for the selected coffee
Â
speciality (see previous table: "Preparation variants").
3. Select the setting that you would like to change.
The display shows a bar with the currently selected setting.
Â
4. Turn the e-Select to change the setting and
• confirm the change by pressing the e-Select or
• cancel the change with the button under the display field
5. Then press the menu button to exit the menu.
The display shows the "Beverage selection" view. The settings are
Â
saved. You can apply the settings by selecting the
the respective button (►"6.3 Preparing coffee specialities").
52
7.2.2 Making personal settings quickly
(Quick Select)
You can also make the settings temporarily before the preparation:
1. In the "Beverage selection" view, press the button
• to change the set coffee strength.
• to change the set water quantity.
• to change the set milk/milk foam quantity.
2. Turn the e-Select and select the desired setting.
3. Press the e-Select.
The selected coffee speciality is prepared with the settings you
Â
have selected. However the setting is not saved.
7.3

Changing device settings

7.3.1 Language

This is how to select the preferred language for the display.
1. Press the menu button for at least 3 seconds and use the e-Select to
select the
DEVICE MENU
2. Then select the
LANGUAGE
menu option.
.
The display shows the available languages.
Â
3. Turn the e-Select to change the setting and
• confirm your entry by pressing the e-Select or
symbol with
• cancel the change with the button under the display field
.
.
Version 3 2012-08