Preparing The Appliance; Preparing Coffee - SEVERIN KA4812 Manual

4 Preparing the appliance

1. Remove all protective films and other packaging material from
the appliance.
2. Set up the appliance in a place that fulfils the following conditions:
• Near a socket outlet with earthing contact (fuse at least 10 A)
• Horizontal and free from vibration/shocks
• Heat-resistant
• Does not react to rubber pads
• Away from heated or flammable surfaces and objects (> 1 m)
• Away from walls (> 15 cm)
3. Clean the appliance as described under ►"7.2 Daily cleaning" on
page 30.
4. Run water through the appliance as described under ►"7.3 Running
water through the appliance" on page 30.
Setting the time
TIP
You must first set the time to ensure the program-
ming function works correctly. If you do not wish to
use this function you can skip setting the time.
1. Repeatedly press the "h" button to set the hour.
2. Repeatedly press the "min" button to set the minutes.
 The time is now set.

5 Preparing coffee

WARNING!
Risk of scalding!
– Do not place parts of the body under the drip
stop while the appliance is in operation.
CAUTION!
To avoid damaging the appliance only fill the water
tank with cold tap water.
TIP
The display switches off 5 minutes after making cof-
fee or, if coffee is not made, 1 minute after the last
entry. To turn on the display again, press one of the
buttons at the front of the appliance. Press the " "
button only when you wish to start brewing directly.
TIP
Empty the water tank by removing the disposable
coffee filter or the permanent filter from the filter
insert, placing the empty vacuum jug into the device
and continuing the preparation by first pushing the
„GRIND OFF" button followed by the „ „ button.
GB
25