Preparing Coffee/Espresso; Drawing Hot Water; Adjusting The Grind - SEVERIN KV 8090 Operating Instructions Manual

LED ist lit: Brewing unit has not been properly inserted
(►"Cleaning the appliance" on page 13)
Led flashes: Maintenance lid has not been properly attached
(►"Cleaning the appliance" on page 13)
LED is lit: Appliance must be descaled
(►"Descaling the appliance" on page 15)
LED flashes: Descaling in process
LED is lit: Appliance is emptied and then switches off
(►"Emptying the appliance" on page 18)

5.2 Preparing coffee/espresso

1. Press one of the two LED buttons for espresso (
 The appliance prepares the coffee/espresso.
2. Wait until the appliance has finished the preparation of the coffee/
espresso.
TIP
If you would like to change the amount of coffee,
keep one of the two buttons (
during the beverage preparation until the appliance
finishes dispensing the desired amount of coffee
(max. 250 ml). The amount of coffee dispensed is
saved by the appliance. Next time you press button
or , the appliance will dispense the amount
of coffee saved.

5.3 Drawing hot water

1. Press button
2. Wait until the appliance is finished dispensing hot water.
) or coffee ( ).

5.4 Adjusting the grind

or ) pressed
1. Place a cup under the outlet.
2. Open the bean container lid.
.
 The appliance dispenses hot water from the outlet.
TIP
If you would like to change the water quantity, keep
button pressed during the beverage preparation
until the appliance finishes dispensing the desired
amount of water (max. 250 ml). The amount of
water dispensed is saved by the appliance. Next
time you press button
dispense the amount of water saved.
CAUTION!
Adjust the grind only while the appliance is grinding
the coffee beans; otherwise the grinder may be
damaged.
TIP
A fine grind is recommended for a light roast and a
coarse grind for a dark roast. The roast is normally
printed on the coffee packaging.
, the appliance will
11