Cleaning The Milk System; Cleaning Program - SEVERIN S2+ One Touch Instruction Manual

8.2.3 Cleaning the milk system

The device has a milk cleaning program that can remove milk residues with
the SEVERIN milk system cleaner.
NOTE!
The cleaning process takes approx. 5 minutes.
1. Press the menu button for at least 3 seconds and use the e-Select to
select the
menu element.
CLEANING
2. Select the
GB
CLEAN MILK SYS.
menu option and press the e-Select.
The display shows:
Â
PLEASE PLACE MILK TUBE IN CLEANING LIQUID
3. Fill a container with 200 ml warm water and 20 ml SEVERIN milk sys-
tem cleanser. (mixing ratio 1:10)
4. Plug the milk tube onto the connection on the coffee-milk dispenser
and hang the other end of the tube in the container filled with cleaning
solution.
5. Press the e-Select to confirm.
The display shows:
Â
PLEASE POSITION CONTAINER
6. Place a cup with a capacity of at least 200 ml on the cup tray below the
coffee-milk dispenser of the device and adjust the height of the coffee-
milk dispenser to the cup height.
7. Press the e-Select to confirm.
The display shows:
Â
CLEAN MILK SYS.
The cleaning of the milk system begins.
58
8. As soon as the command
PLEASE PLACE MILK TUBE IN WATER JAR
appears on the display, hang the end of the milk tube in a container filled
with 200 ml clear, cold water.
9. Press the e-Select to confirm.
The display shows:
Â
PLEASE POSITION CONTAINER
10. Empty the cup underneath and place it underneath the coffee-milk
dispenser of the device on the cup tray once again.
11. Press the e-Select to confirm.
The display shows:
Â
RINSING
The rinsing of the milk system is complete as soon as "Beverage
selection" appears again.

8.2.4 Cleaning program

The device has a cleaning program with which the coffee system can be
rinsed and cleaned intensively with a cleaning tablet.
NOTE!
If you carry out the cleaning program immediately
after the display of a cleaning message, steps 1
and 2 can be omitted.
1. Press the menu button for at least 3 seconds and use the e-Select to
select the menu option.
CLEANING
2. Then select the
CLEANING
menu option and press the e-Select.
The display shows:
Â
PLEASE FILL WATER CONTAINER
Version 3 2012-08