Preparing The Appliance; Preparing Coffee - SEVERIN KA4814 Manual

4 Preparing the appliance

1. Remove all protective films and other packaging material from
the appliance.
2. Set up the appliance in a place that fulfils the following conditions:
• Near a socket outlet with earthing contact (fuse at least 10 A)
• Horizontal and free from vibration/shocks
• Heat-resistant
• Does not react to rubber pads
Away from heated or flammable surfaces and objects (> 1 m)
•
• Away from walls (> 15 cm)
3. Clean the appliance as described under ►"7.2 Daily cleaning" on page
30.
4. Run water through the appliance as described under ►"7.3 Running
water through the appliance" on page 30.
Turn off button sounds
TIP
A beep is emitted to confirm each button press.
These button sounds can be switched off. The
beeps emitted after the brewing/warming processes
cannot be disabled!
1. Press the " " button for 2 seconds. You will see "
flashing on the display.
2. Press the " " button
→
: button sounds switched on
→
: button sounds switched off
→ Wait a few seconds. The most recent option displayed will be
applied.
Setting the time
1. Repeatedly press the "
2. Repeatedly press the "
 The time is now set.

5 Preparing coffee

Blooming function
" and " "
TIP
You must first set the time to ensure the program-
ming function works correctly. If you do not wish to
use this function you can skip setting the time.
" button to set the hour.
" button to set the minutes.
WARNING!
Risk of scalding!
– Do not place parts of the body under the drip
stop while the appliance is in operation.
CAUTION!
To avoid damaging the appliance only fill the water
tank with cold tap water.
TIP
In order to retain a more full-bodied coffee aroma,
the device is equipped with an Blooming function.
The coffee grounds are moistened with hot water
before brewing. It can swell up, the coffee taste
becomes more intense.
GB
25