5
To set the "PRT Area (Dup. Left Margin)" function
The left margin of the printing area in double-sided copies can be adjusted for each
paper drawer.
The procedure with A3-size paper loaded into the 1st drawer is described below.
Note
The top margin of the print area is adjusted during manufacturing of the copier.
Normally, the top margin will not need to be adjusted.
1
Load A3-size paper into the 1st drawer.
2
Press the [UTILITY] key.
3
Touch [Admin. Mode].
4
Using the keypad, enter the administrator access code.
5
Touch [Expert Mode].
6
Touch [PRT Area (Dup.
Left Margin)].
7
Touch [1st Drawer].
8
Press the [START] key.
The test pattern is
printed on A3-size
paper.
5-52
5.5 Administrator Mode Operations
Konica 8020/8031