5.5 Administrator Mode Operations
To set the "Disable Shut off Mode" function
This function is used to disable the Shut off mode. (The default setting is [No].)
Setting this function to "Yes" allows you to disable the Shut off mode completely
using the "Shut off" function available through the User's Choice: 1 screen.
For details on the Shut off mode, refer to "Original Documents/Feeding the
Document" in the Basic Operations volume.
For more details on setting the "Shut off" function, refer to "Specifying Default
Settings ("User's Choice" Functions)" (page 5-7).
1
Press the [UTILITY] key.
2
Touch [Admin. Mode].
3
Using the keypad, enter the administrator access code.
4
Touch [Admin. set].
5
Touch [Disable Shut off
Mode].
6
Touch [Yes].
7
Touch [Enter].
8
Touch [Fin. Time] again
in the next three
screens that appear.
Konica 8020/8031
5
5-37