The following table shows the available key operations for entering custom user data in the
dialogs:
Key
TAB
ENTER
9.2.18.4
Mouse and keyboard control
Entering custom user data
Custom user data (name, password, group, logoff time) is entered sequentially in several
dialogs.
Procedure
Mouse
Start the input mode by clicking on the desired user name.
Keyboard
Start the input mode by activating the simple user view with the <Tab> sequence and then
select the user with <Enter>.
The following table shows the available key operations for entering custom user data in the
dialogs:
Key
<Up>/<Down>:
<Tab>
<Enter>
TP 270, OP 270, MP 270B (WinCC flexible)
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
Function
Selects the previous/next user
Selects the next element in the dialog
Opens the next dialog
Function
Selects the previous/next user
Selects the next element in the dialog
Opens the next dialog
Operate project
9.2 Controlling graphic objects
9-51