Operate Project; Basic Principles Of Operation; Basics For Operation In Runtime - Siemens SIMATIC TP 270 Operating Instructions Manual

Operate project

9.1

Basic principles of operation

9.1.1

Basics for operation in runtime

Introduction
The process control features are defined by the project configuration and the options
available on the HMI device. This chapter contains general information on the settings for the
runtime software and the operation of predefined screen objects.
Screen objects provide general system functions. Screen objects can be used and
configured in screens in the project.
WinCC flexible Runtime can be operated with the keys, the touchscreen or via keyboard and
mouse, depending on the HMI device used.
Multiple key operation
Multiple key operation can trigger unintentional actions.
• When you use a key device, you may not press more than two function keys
• If a touchscreen is used, do not operate more than one touch object at a time.
TP 270, OP 270, MP 270B (WinCC flexible)
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
simultaneously.
9
9-1